Blog has moved!

We have moved the Guillemot blog

This summer, we spent 2 weeks on the Guillemot for our first extended cruise. We went from Seattle to the San Juans and then back through Seattle to the South Sound. Here is the first post from our voyage:

Day 1 (Saturday, July 3) Home to Marrowstone


We had a meeting with the contractor for our kitchen remodel in the morning.. Packed until noon. One last trip to Fisheries for supplies. Loadedthe boat. Got sandwiches at Ballard Market. Left at 2:00 pm. Went to Morrisons for fuel (48.6 gallons at $3.49/gal). Our wait at the locks was around ½ hour – big boat in front of us had to back out – leaving room for us. Cruised along western shore of the Sound to Marrowstone Island. Went along the eastern shore of Marrowstone, rather than through the Port Townsend canal. Arrrived Marrowstone around 8:30 pm. Spent the night tied to our friend Esther Trueblood’s buoy. Salmon and corn for dinner. 38.3 miles, 6.2 hours underway



Here we are at Esther's buoy at Marrowstone. Full Disclosure requires me to say that this picture was actually taken a year earlier on our first-ever cruise. Thanks to Ken Meyer for sharing the image



The Guillemot (in the background) and her 2 captains. Marrowstone Island

Day 2 (Sunday, July 4) Marrowstone to Fisherman Bay

Nan made eggs and biscuits for breakfast. Loves her diesel stove. Left Marrowstone around 8:00 am. Crossed the eastern end of the Strait of Juan de Fuca, past the eastern side of Smith Island/Minor Island – lots of seals hauled out on the tip of Minor Island.



Seals on the western tip of Minor Island

Rough crossing – seas 3-4 feet, swells, lots of chop. Guillemot handled super, but we discovered what things were not well secured. We both agreed this was not fun. As we got near the southern end of Lopez Is, we headed for the shore, but the swells continued until the surf began, so no relief there. At the southwest corner of Lopez, Nan decided to duck into Davis Bay, behind Hall and Long Islands – finally found some calm water. Came out in the San Juan Channel – much calmer. Anchored in Fisherman Bay (Lopez Is), just south of Lopez Islander resort. Discovered that one of the drawers was jammed. No access to the drawer. We weren’t concerned until we realized it contained half of our wine supply. Rowed to dinghy dock and walked into Lopez village. Had lunch at local grill. Bought brownies and cookies (for our dinner) at Molly B’s. Still quite windy and cloudy. Oswalds from Freya (CYA) came by on dinghy to say hello , moored in bay as well. Guys came by collecting money for fireworks display. Fireworks began around 10:20. Friday Harbor fireworks began earlier – could see the lights in the clouds – made me think of distant battles in the dark. Lopez fireworks were long and impressive. 33.9 miles, 5.7 hours

One of the boats in Fisherman's Bay. All it needs is a little love and care

Day 3 (Monday, July 5) Fisherman Bay to Rosario

Nan determined that the only way to access the wine drawer was to drill a hole in the storage locker above the drawer with a hole saw big enough for her hand. We walked to the hardware store (around 3 miles) and got a 4 inch hole saw and a mandrel for our drill. We also went to the chandlery at IMC and got lines to rig the Pigeon (our dinghy) for sailing. Discovered that IMC was owned by Bob Meng’s brother. Left around noon. Decided to try towing the dinghy behind us. Total disaster. Got about a mile outside the harbor, and the dinghy was filled with water. Pulled out of the lane, and bailed for 15 minutes. Lots of wakes, rocking around. Decided it was much wiser to slowly tow the dinghy back into the harbor. Did so. Finished bailing and put the dinghy back on the boat in the calm waters of the harbor. Left for a second time at 1:30. Went through the Upright Channel to the East Sound of Orcas Island. Got a mooring buoy at Rosario Resort. Discovered that the mandrel we had bought for the holesaw on Lopez was for a ½ inch drill, and we had a 3/8 inch drill, so we could not work on the stuck drawer. Fortunately, ½ the wine was in other drawers. Nan rigged the Pigeon, and we sailed into the dock (with a little rowing at the end). Took showers. Realized that although we had brought clean clothes, we had forgotten towels. Made notes to self for next shower. Had beer and calamari and onion rings at grill. Toured Moran Mansion. Went to bed early. The wind died down and the sun came out. 8 miles, 1.4 hours

The resort at Rosario, Orcas Island

There's a hole in my Guillemot, Dear Liza, Dear Liza

This year, while we were at the Poulsbo Rendevous, we got a chance to see the bow of our boat - we don't normally see the starboard side when she is docked at the marina. Anyway, we were standing around sharing boat talk with our fellow wooden-boat-nuts, when Nan said, (and I quote), "There's a hole in our boat!" And sure enough there was - actually 2 of them, one on either side of the bow, both just above the waterline - just behind the stem. For the last several weeks, I had noticed there was more water than usual in the bilge after a trip. I'd get it all out and no more would accumulate while she was at dock. Suddenly, it all made sense - the holes were small and above the waterline, so we would only take on water when we were moving through the waves.

When we left for India several weeks ago, I took the boat over the Jensen Motorboats - our boat's favorite day camp! They got her pulled today, and cut back the rotten planks. Here is the view of the starboard side (the worse side):



Starboard Side View



As you can see, they have cut away 2 planks. There is also some water damage to the stem (brown vertical portion on the left), so they will have to put in what used to be called a Dutchman, but in today's PC world was referred to as a Dutch Person. The planks will be cut back around 6 feet or so and replaced with yellow cedar (which is the wood used in the orignal planks). Here is a view of the port side:

Port Side View

So far, they have only pulled one plank on the port side, but there is a soft spot on the top of the plank below the hole, so they may have to pull another.

Peter Proctor, my guru at Jensen's, says that the planks were bad before we bought the boat, that either the surveyor didn't catch them, or they might have been in the middle of the board. He also said that planks can last up to 60 years, so they will not need to be replaced again while we own the boat. He also suggested we spend as much time in salt water as possible, since the salt water cures the wood, but is hard on the fasteners, while the fresh water is good for the fasteners, but not for the wood.

The plan now is to let the boat dry out over the weekend, and then decide how much additional rot there is.